Trinuclear Cu-based covalent organic framework: π-conjugated framework regulating electron delocalization to promote photoreduction CO2.

Sunlight-driven CO2 reduction to value-added chemicals is an effective strategy to promote carbon recycling. The exploration of catalysts with efficient charge separation is crucially important for highly efficient CO2 photoreduction. In this work, the preparation of metal-cluster-based covalent organic framework (CuABD) integrated features from both metal organic frameworks (MOFs) and covalent organic frameworks (COFs) through the condensation of diamines and functionalized trinuclear copper clusters demonstrate a thoughtful design strategy. The reported yield of 1.3 mmol g-1 h-1 for formic acid (HCOOH) under simulated solar irradiation is impressive, surpassing the performance of many COF- and MOF-based catalysts previously reported. Compared to its isomorphic metal-free structure (named BDFTD) and bare trinuclear Cu cluster which present extremely poor catalytic activities, CuABD displays remarkably enhanced CO2 reduction activity. Experimental and theoretical investigations reveal that the efficient charge transfer between diamine monomer and cyclic trinuclear copper (I) units, and the electron delocalization of the π-conjugated framework are responsible for the appealing catalytic performance. In summary, the work presents a well-structured and scientifically sound exploration of a metal-cluster-based covalent organic framework for efficient CO2 reduction under sunlight.

Supramolecular Assembly Based on Calix(4)arene and Aggregation-Induced Emission Photosensitizer for Phototherapy of Drug-Resistant Bacteria and Skin Flap Transplantation.

Photodynamic therapy as a burgeoning and non-invasive theranostic technique has drawn great attention in the field of antibacterial treatment but often encounters undesired phototoxicity of photosensitizers during systemic circulation. Herein, a supramolecular substitution strategy is proposed for phototherapy of drug-resistant bacteria and skin flap repair by using macrocyclic p-sulfonatocalix(4)arene (SC4A) as a host, and two cationic aggregation-induced emission luminogens (AIEgens), namely TPE-QAS and TPE-2QAS, bearing quaternary ammonium group(s) as guests. Through host-guest assembly, the obtained complex exhibits obvious blue fluorescence in the solution due to the restriction of free motion of AIEgens and drastically inhibits efficient type I ROS generation. Then, upon the addition of another guest 4,4'-benzidine dihydrochloride, TPE-QAS can be competitively replaced from the cavity of SC4A to restore its pristine ROS efficiency and photoactivity in aqueous solution. The dissociative TPE-QAS shows a high bacterial binding ability with an efficient treatment for methicillin-resistant Staphylococcus aureus (MRSA) in dark and light irradiation. Meanwhile, it also exhibits an improved survival rate for MRSA-infected skin flap transplantation and largely accelerates the healing process. Thus, such cascaded host-guest assembly is an ideal platform for phototheranostics research.

Precise ligand engineering of Ir(III)-based photosensitizer with aggregation-induced emission for image-guided photodynamic therapy.

Photodynamic therapy (PDT), which relies on the production of reactive oxygen species (ROS) induced by a photosensitizer to kill cancer cells, has become a non-invasive approach to combat cancer. However, the conventional aggregation-caused quenching effect, as well as the low ROS generation ability of photosensitizers, restrict their biological applications. In this work, a new Ir(III) complex with a dendritic ligand has been strategically designed and synthesized by ingenious modification of the ancillary ligand of a reported Ir(III) complex (Ir-1). The extended π-conjugation and multiple aromatic donor moieties endow the resulting complex Ir-2 with obvious aggregation-induced emission (AIE) activity and bathochromic emission. In in vitro experiments, importantly, Ir-2 nanoparticles exhibit the excellent photoinduced ROS generation capabilities of O2 •- and 1 O2 , as well as excellent biocompatibility and the lipid droplets (LDs) targeting feature. This study would provide useful guidance to design efficient Ir(III)-based photosensitizers used in biological applications in the future.

Deep-red Emitting Ir(III) Complexes as Type-I Photosensitizers for Lipid Droplets Targeted Photodynamic Therapy.

Photodynamic therapy (PDT) relying on photosensitizer-induced production of reactive oxygen species (ROS) for killing cancer cells has emerged as a non-invasive anti-cancer strategy. Compared with oxygen-dependent type-II photosensitizers (PSs) for PDT, the development of intrinsic oxygen-independent type-I ones is highly desired but remains a challenge. In this work, two netural Ir(III) complexes that can produce type-I reactive oxygen species, namely MPhBI-Ir-BIQ (Ir-1) and NPhBI-Ir-BIQ (Ir-2), were synthesized. Bright deep-red emitting nanoparticles with moderate particle size are beneficial for imaging-guided PDT. In in vitro experiments, importantly, the excellent biocompatibility, the targeting of lipid droplets (LDs), and the type-I ⋅OH and O2 ⋅- generation promoted effective photodynamic activity. This work will guide the building of type-I Ir(III) complexes PSs and can provide advantages for potential clinical applications under hypoxic conditions.

AIE-active Ir(III) complexes as type-I dominant photosensitizers for efficient photodynamic therapy.

The ability of a photosensitizer (PS) to generate reactive oxygen species (ROS) including type I oxygen free radicals and type II 1O2 is pivotal for photodynamic therapy. Luminescent Ir(III) complexes are effective PSs with high 1O2 generation ability owing to their high intersystem crossing ability and effective energy transfer to 3O2. However, so far, reports on type I ROS based on ˙OH generation induced by Ir(III) PS are still rare. In this work, four novel aggregation-induced emission (AIE)-active Ir(III) PSs, namely MFIriqa, MFIrqa, SFIriqa, and SFIrqa have been designed and synthesized, which show highly efficient emission in the aggregated state. Cell imaging experiment results indicate that all four Ir(III) PSs can effectively improve the signal-to-noise ratio of imaging by reducing the interference from the background due to their fascinating AIE properties. Importantly, in vitro, Ir(III) PSs MFIrqa, SFIriqa, and SFIrqa nanoparticles show obvious photodynamic activity toward cancer cells upon irradiation accompanied by type I ˙OH generation, which may be attributed to the unique excited-state characteristics of Ir(III) complexes. This work will provide guidance for the construction of a type I photosensitizer based on the AIE-active Ir(III) complex, which offers great advantages for potential clinical applications under hypoxic conditions.

Recent Progress in Blue Thermally Activated Delayed Fluorescence Emitters and Their Applications in OLEDs: Beyond Pure Organic Molecules with Twist D-π-A Structures.

Thermally activated delayed fluorescence (TADF) materials, which can harvest all excitons and emit light without the use of noble metals, are an appealing class of functional materials emerging as next-generation organic electroluminescent materials. Triplet excitons can be upconverted to the singlet state with the aid of ambient thermal energy under the reverse inter-system crossing owing to the small singlet-triplet splitting energy (ΔEST). This results from a specific molecular design consisting of minimal overlap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital, due to the spatial separation of the electron-donating and electron-releasing part. When a well-designed device structure is applied, high-performance blue-emitting TADF organic light-emitting diodes can be realized with an appropriate molecular design. Unlike the previous literature that has reviewed general blue-emitting TADF materials, in this paper, we focus on materials other than pure organic molecules with twist D-π-A structures, including multi-resonance TADF, through-space charge transfer TADF, and metal-TADF materials. Cutting-edge molecules with extremely small and even negative ΔEST values are also introduced as candidates for next-generation TADF materials. In addition, OLED structures used to exploit the merits of the abovementioned TADF emitters are also described in this review.

Novel Ir(III) Complexes with NHC-Based Ancillary Ligands for Efficient Nondoped OLEDs.

Nondoped organic light-emitting diodes (OLEDs) are of paramount importance for display and lighting applications owing to their advantages of facile fabrication and outstanding stability. However, nondoped OLEDs achieving extraordinary electroluminescence (EL) performance and low turn-on voltage (Von) remain sparse. Here, three Ir(III) complexes featuring N-heterocyclic carbene (NHC) auxiliary ligands functionalized with electron-deficient aromatic sulfonyl or phosphine oxide groups are reported as promising emitters for nondoped OLEDs. All Ir(III) complexes exhibit green emission with relatively high neat film efficiency. Although the photoluminescence spectra of three complexes reveal similarities, there are distinct differences in the nondoped EL performance. The nondoped device N3 based on tBu-Ir-ISO displays the most eminent EL performances and presents a low Von of 2.1 V, a power efficiency of 30.7 lm W-1, and a maximum current efficiency of 27.0 cd A-1, which can be attributed to steric hindrance and balanced carrier-transporting ability induced by electron-deficient substituents. Moreover, doped devices D1-D3 also realize excellent EL performance. It is believed that the strategy reported herein is a simple and efficient way of constructing excellent Ir(III) complexes for nondoped phosphorescent OLEDs.

Self-cleaning wearable masks for respiratory infectious pathogen inactivation by type I and type II AIE photosensitizer.

Although face masks as personal protective equipment (PPE) are recommended to control respiratory diseases with the on-going COVID-19 pandemic, improper handling and disinfection increase the risk of cross-contamination and compromise the effectiveness of PPE. Here, we prepared a self-cleaning mask based on a highly efficient aggregation-induced emission photosensitizer (TTCP-PF6) that can destroy pathogens by generating Type I and Type II reactive oxygen species (ROS). The respiratory pathogens, including influenza A virus H1N1 strain and Streptococcus pneumoniae (S. pneumoniae) can be inactivated within 10 min of ultra-low power (20 W/m2) white light or simulated sunlight irradiation. This TTCP-PF6-based self-cleaning strategy can also be used against other airborne pathogens, providing a strategy for dealing with different microbes.

Boosting the photodynamic therapy of near-infrared AIE-active photosensitizers by precise manipulation of the molecular structure and aggregate-state packing.

Organic functional materials have emerged as a promising class of emissive materials with potential application in cancer phototheranostics, whose molecular structures and solid-state packing in the microenvironment play an important role in reactive oxygen species (ROS) generation and the photodynamic therapy (PDT) effect. Clarifying the guidelines to precisely modulate PDT performance from molecular and aggregate levels is desired but remains challenging. In this work, two compounds, TCP-PF6 and TTCP-PF6, with similar skeletons are strategically synthesized, in which a thiophene segment is ingeniously introduced into the molecular backbone of TCP-PF6 to adjust the intrinsic molecular characteristics and packing in the aggregate state. The experimental and theoretical results demonstrate that TTCP-PF6 can form tight packing mode in comparison with TCP-PF6, resulting in efficient cell imaging and enhanced ROS generation ability in vitro and in vivo. The promising features make TTCP-PF6 a superior photosensitizer for PDT treatment against cancer cells by targeting mitochondria. These findings can provide a feasible molecular design for modulating the biological activity and developing photosensitizers with high ROS generation and PDT effect.

Chiral self-sorting and guest recognition of porous aromatic cages.

The synthesis of ultra-stable chiral porous organic cages (POCs) and their controllable chiral self-sorting at the molecular and supramolecular level remains challening. Herein, we report the design and synthesis of a serial of axially chiral porous aromatic cages (PAC 1-S and 1-R) with high chemical stability. The theoretical and experimental studies on the chiral self-sorting reveal that the exclusive self-recognition on cage formation is an enthalpy-driven process while the chiral narcissistic and self-sorting on supramolecular assembly of racemic cages can be precisely regulated by π-π and C-H…π interactions from different solvents. Regarding the chemical stability, the crystallinity of PAC 1 is maintained in aqueous solvents, such as boiling water, high-concentrated acid and alkali; mixtures of solvents, such as 1 M H2SO4/MeOH/H2O solution, are also tolerated. Investigations on the chiral sensing performance show that PAC 1 enables enantioselective recognition of axially chiral biaryl molecules.

An unprecedented fully reduced {MoV 60} polyoxometalate: from an all-inorganic molecular light-absorber model to improved photoelectronic performance.

Fully reduced polyoxometalates are predicted to give rise to a broad and strong absorption spectrum, suitable energy levels, and unparalleled electronic and optical properties. However, they are not available to date. Here, an unprecedented fully reduced polyoxomolybdate cluster, namely Na8[MoV 60O140(OH)28]·19H2O {MoV 60}, was successfully designed and obtained under hydrothermal conditions, which is rare and is the largest fully reduced polyoxometalate reported so far. The MoV 60 molecule describes one Keggin {ε-Mo12} encapsulated in an unprecedented {Mo24} cage, giving rise to a double truncated tetrahedron quasi-nesting architecture, which is further face-capped by another four {Mo6} tripods. Its crystalline stability in air, solvent tolerance, and photosensitivity were all shown. As a cheap and robust molecular light-absorber model possessing wide light absorption, MoV 60 was applied to build a co-sensitized solar cell photoelectronic device along with N719 dyes and the optimal power conversion efficiency was 28% higher than that of single-dye sensitization. These results show that MoV 60 polyoxometalate could serve as an ideal model for the design and synthesis of all-inorganic molecular light-absorbers for other light-driven processes in the future.

Molecular engineering to achieve AIE-active photosensitizers with NIR emission and rapid ROS generation efficiency.

Near-infrared (NIR) photosensitizers with rapid reactive oxygen species (ROS) production ability are in great demand owing to their promising performance toward boosting photodynamic therapy (PDT) and deep-tissue imaging, but molecular design guidelines for efficient photosensitizers are rarely elucidated. Herein, three AIEgens named DBP, TBP, and TBP-SO3 are designed and synthesized by precise donor-acceptor (D-A) molecular engineering to deeply understand the structure-property-application relationships. All the compounds exhibit AIE characteristics with strong long-wavelength emission in the aggregated state and are capable of efficiently producing ROS under white light irradiation. By controlling the ability of the D-A units, TBP-SO3 realizes NIR emission and more rapid ROS generation ability due to the promoted intersystem crossing processes compared with those of DBP and TBP. In addition, NIR-emitting TBP-SO3 is capable of specific endoplasmic reticulum targeting and excellent PDT treatment ability of cancer cells and bacteria. This successful example of molecular engineering paves a valuable way for developing advanced PSs with AIE properties, efficient ROS generation ability, and intense emission for fluorescence imaging PDT.

Copper-Based Metal-Organic Framework with a Tetraphenylethylene-Tetrazole Linker for Visible-Light-Driven CO2 Photoconversion.

The design of efficient and inexpensive photocatalysts for CO2 photoreduction under visible light is of great significance for the sustainable development of the entire society. Herein, a copper-based metal-organic framework (MOF) (CUST-804) using a bulky tetraphenylethylene-tetrazole linker is synthesized and successfully used as a photocatalyst for CO2 reduction. The structural characterizations, as well as the photophysical properties, are investigated systematically. In the heterogeneous catalytic system, CUST-804 exhibits a robust CO production activity up to 2.71 mmol g-1 h-1 with excellent recyclability along with a selectivity of 82.8%, which is comparable with those of the reported copper-based MOF system. Theoretical calculations demonstrated that, among three kinds of coordinated model, only the 5-coordinated Cu site is active for CO2 reduction, in which the *COOH intermediate is stabilized and CO is readily desorbed. The results obtained herein can provide fresh insights into the realization of efficient copper-functionalized crystalline photocatalysts for CO2 reduction.

Rational Design of Ir(III) Phosphors to Strategically Manage Charge Recombination for High-Performance White Organic Light-Emitting Diodes.

Constructing high-quality white organic light-emitting diodes (WOLEDs) remains a big challenge because of high demands on the electroluminescence (EL) performance including high efficiency, excellent spectral stability, and low roll-off simultaneously. To achieve effective energy transfer and trap-assisted recombination in the emissive layer, herein, four Ir(III) phosphors, namely, mOMe-Ir-PI (1), pOMe-Ir-PI (2), mOMe-Ir-PB (3), and pOMe-Ir-PB (4), were strategically designed via simple regulation of the substituent moiety and π conjugation of the chelated ligands. Their photophysical and EL properties were systematically investigated. When these phosphors are employed as doped emitters, the monochromic green organic light-emitting diodes not only exhibit a superior performance with the characteristics of 50.2 cd A-1, 39.2 lm W-1, and 15.1%, but also maintain a negligible roll-off ratio of 0.2% at 1000 cd m-2, which are better than those of commercial green Ir(ppy)2acac and Ir(ppy)3 in the same device configuration. Inspired by these outstanding performances, we successfully fabricated the warm WOLED utilizing 2 as a green component, affording a peak efficiency of 42.0 cd A-1, 29.3 lm W-1, and 18.6% and retaining at 39.9 cd A-1, 23.7 lm W-1, and 17.4% even at 1000 cd m-2. The results herein demonstrate the superiority of the molecular design and propose a simple method toward the development of promising Ir(III) phosphors for high-efficiency WOLEDs.

Exploiting the Twisted Intramolecular Charge Transfer Effect to Construct a Wash-Free Solvatochromic Fluorescent Lipid Droplet Probe for Fatty Liver Disease Diagnosis.

The prominent pathological feature of fatty liver disease lesions is excessive fat accumulation in lipid droplets in hepatocytes. Thus, developing fluorescent lipid droplet-specific probes with high permeability and a high imaging contrast provides a robust tool for diagnosing fatty liver diseases. Herein, we rationally developed a novel donor-acceptor lipophilic fluorescent probe ANI with high photostability for wash-free visualization of lipid droplets and fatty liver disease characteristics. ANI showed a typical twisted intramolecular charge transfer effect with very faint fluorescence in high-polar solvents, but dramatically boosted emissions in low-polar environments. The solvatochromic probe can selectively light up lipid droplets with a high contrast in a wash-free manner. Further use of ANI to reveal the excessive accumulation of lipid droplets with a significantly large size in the liver tissues from the fatty liver disease model mice was successfully demonstrated. The remarkable imaging performances rendered ANI an alternative tool for accurately evaluating fatty liver disease in intraoperative diagnosis.

Dynamic Interface with Enhanced Visible-Light Absorption and Electron Transfer for Direct Photoreduction of Flue Gas to Syngas.

The direct usage of CO2 in the flue gas to produce fuels or chemicals is of great significance from energy-saving and low-cost perspectives, yet it is still underexplored. Herein, we report the photoreduction of CO2 from the simulated industrial exhaust by synergistic catalysis of TEOA and a metal-free composite (COF1-g-C3N4) fabricated via covalently grafting COF1 with g-C3N4. The hydrogen bond interaction between TEOA and hydrazine units on COF1 is detected in diluted CO2, which leads to significantly enhanced light absorption in the whole visible-light region. Also, the photo-induced electrons undergo fast transfer from COF1 to g-C3N4. This kind of dynamic interface with enhanced light absorption and electron transfer effects promotes the photosynthetic yield of syngas to 165.6 µmol·g-1·h-1 with the use of simulated exhaust gas as a raw material directly. The photosynthetic yield of syngas ranks among the highest of known metal-free catalysts in diluted CO2. This work provides a general rule for designing efficient catalysts via a controlled catalytic interface and new insights into the role of TEOA in photochemical CO2 reduction.

Polymerization-Enhanced Photophysical Performances of AIEgens for Chemo/Bio-Sensing and Therapy.

AIE polymers have been extensively researched in the fields of OLEDs, sensing, and cancer treatment since its first report in 2003, which have achieved numerous breakthroughs during the years. In comparison with small molecules, it can simultaneously combine the unique advantages of AIE materials and the polymer itself, to further enhance their corresponding photophysical performances. In this review, we enumerate and discuss the common construction strategies of AIE-active polymers and summarize the progress of research on polymerization enhancing luminescence, photosensitization, and room-temperature phosphorescence (RTP) with their related applications in chemo/bio-sensing and therapy. To conclude, we also discuss current challenges and prospects of the field for future development.

Organic Supramolecular Zippers with Ultralong Organic Phosphorescence by a Dexter Energy Transfer Mechanism.

Ultralong organic phosphorescence (UOP) materials glow persistently in the dark, which offers new exciting possibilities in the fields of anti-counterfeiting, photoelectric devices and biological imaging. However, the development of single-component UOP materials remains a great challenge. Herein, we develop a single component organic supramolecular zipper system with a lifetime up to 0.77 s. Owing to the introduction of a pyrazole ring into the diphenylsulfone group, the "V" shaped molecules were artfully self-assembled into supramolecular zippers via π-π and C-H⋅⋅⋅π interactions, that is not only of significance in highly efficient generation of triplet excitons but also facilitates a Dexter energy transfer process within supramolecular zippers, that are responsible for alleviating radiative and non-radiative deactivation decay of triplet excitons, to finally boost the UOP. This finding not only gives a new set of guidelines for the design of single-component UOP molecules but also reveals the UOP mechanism from a new perspective.

Fluorescence Imaging and Photodynamic Inactivation of Bacteria Based on Cationic Cyclometalated Iridium(III) Complexes with Aggregation-Induced Emission Properties.

Antibacterial photodynamic therapy (PDT) is one of the emerging methods for curbing multidrug-resistant bacterial infections. Effective fluorescent photosensitizers with dual functions of bacteria imaging and PDT applications are highly desirable. In this study, three cationic and heteroleptic cyclometalated Ir(III) complexes with the formula of [Ir(CˆN)2 (NˆN)][PF6 ] are prepared and characterized. These Ir(III) complexes named Ir(ppy)2 bP, Ir(1-pq)2 bP, and Ir(2-pq)2 bP are comprised of three CˆN ligands (i.e., 2-phenylpyridine (ppy), 1-phenylisoquinoline (1-pq), and 2-phenylquinoline (2-pq)) and one NˆN bidentate co-ligand (bP). The photophysical characterizations demonstrate that these Ir(III) complexes are red-emitting, aggregation-induced emission active luminogens. The substitution of phenylpyridine with phenylquinoline isomers in the molecules greatly enhances their UV and visible-light absorbance as well as the photoinduced reactive oxygen species (ROS) generation ability. All three Ir(III) complexes can stain both Gram-positive and Gram-negative bacteria efficiently. Interestingly, even though Ir(1-pq)2 bP and Ir(2-pq)2 bP are constitutional isomers with very similar structures and similar ROS generation ability in buffer, the former eradicates bacteria much more effectively than the other through white light-irradiated photodynamic inactivation. This work will provide valuable information on the rational design of Ir(III) complexes for fluorescence imaging and efficient photodynamic inactivation of bacteria.

Understanding Mechanochromic Luminescence on Account of Molecular Level Based on Phosphorescent Iridium(III) Complex Isomers.

Mechanochromic luminescent (MCL) materials are promising in pressure sensors, security papers, photoelectric devices and optical data recording. Although some kinds of MCL-active iridium(III) complexes with various soft substituent functional ligands (e.g., dendritic carbazole, flexible chains, and Schiff base ligands) were reported, the MCL mechanism is still not clear and mainly ascribes to the physical phase transformations from crystalline state to amorphous state in response to force stimulus at present stage, and deserves further study in order to obtain more intelligent MCL materials. Herein, two new iridium(III) complex isomers are tactfully constructed and show distinctly opposite MCL properties in spite of the same physical phase transformations happening on them. The absolutely out of the ordinary MCL mechanism has been presented on account of molecular level for the first time via the comparative study of photophysical properties based on isomers 1 and 2 with the help of crystal structure analysis, room/low temperature emission spectra, NMR, PXRD, and TD-DFT calculations. All of these results suggest that the emitting state dominated by the triplet charge transfer excited state (3CT) plays a key role in achieving mechanochromic luminescence in iridium(III) complex systems.